Operation Hearth Re-Tile - Grouted Goodness!!

Are you ready for some grouted goodness?!?  I sure was…especially after steps 1, 2, 3 and 4 of my hearth re-tile project!! 

Before I could dive in head grout-float first, I had to seal things up.  One of the fantastic supplies The Tile Shop provided me with was Premium Gold Marble & Onyx Sealer. 

I made sure my marble was nice and clean, threw on some chemical-proof gloves, and sealed things up following the instructions on the back of the bottle.  Then I impatiently waited for 2 hours to tick by {the minimum time to pass before you could grout}.  Once time was up, I immediately hopped into the grouting process.

Hubby and I mixed up our grout following these instructions.  We combined the supplied admixture and dry grout in a clean bucket...mixing everything with a mixer bar until the consistency was that of toothpaste.  

The admixture is a latex-fortified liquid that speeds up cure time and helps prevent grout cracks due to shrinkage.  It also helps to maintain grout color consistency.  {I was super happy The Tile Shop recommended this product rather than having me mix the dry powder with just plain water.}

Once the grout was mixed, I let it sit for a few minutes {which is recommended}, and filled a bucket with some clean water and got my sponge and paper towels ready.  Then I got busy with my float. ;)

If I was a smart person and thought about how much of a mess grout can make when combined with wood grain, I would have taped off the wood that trims out the tile of our hearth.  But I was just so excited, and ahem...inexperienced, that unfortunately, that thought didn't occur to me until I grouted the first little patch of the hearth.  Thanks to my big tiling sponge, paper towels and hubby switching out my water bucket when things got a little dirty, the mess was manageable.

After everything was grouted using this method, I wiped the tiles down with a clean sponge to remove any lingering grout that didn't belong on top of the tiles.

Then I let the grout set for 48 hours, gave it another scrub down to make sure there was no grout or haze left, and applied a second round of sealer.  This coat would help to seal and protect the grout lines.

After that it was time to caulk.  Ohhhh caulk...you magical material!  It helped things go from this...

...to this.  MUCH better!

And then it was time to rig our spray painted fireplace screen back into place.  Ideally, hubby and I really, really, reallyyyyyyyyyyyyyyyyy wanted to install a gas insert to finish off the fireplace makeover, but after we received a quote...we realized we can't swing the cost of the unit right now.  Thankfully, we already have the gas line in place, so when we have enough saved, that piece of the puzzle is already taken care of.  {We took care of that when we were renovating the entire main floor and had plumbers here working on our two bathrooms.}

So for now, we'll sit back and enjoy the fan-freakin-tastic view we now have of our delicious marble hearth.

I mean seriously...I cannot get enough of this tile.  It looks amazing from any angle, and finally makes our fireplace feel like "us".

I'll leave you with one last before and after...

...and a HUGE thank you to The Tile Shop for making this project possible with their terrific products!  If anyone has a tiling project in their future, you must check out their extensive materials. :)



***Although I was super, duper lucky to get some free tile and materials for this project from The Tile Shop, this is not a sponsored post.  I've always promised to keep it real with you guys, so I wanted to let you guys know how much they rock! :)***

Operation Hearth Re-Tile - Let the Laying Begin...

With a ton of the "prep" work out of the way {inspiration, demolition and cutting/dry fitting}...our hearth re-tile project was heading towards the finish line.  Unfortunately for me, in order to get there, I'd have to get over my fear of messing something up, and permanently adhere my carefully cut tiles to my sorta smooth surface.

To those of you who have been keeping up with this project...it's pretty clear that every step of the way has been a little nerve-wracking for me.  I mean, can you blame me?  I'm a complete novice.  I've never done any sort of tile work...ever.  So while I had little confidence in my tile setting skills, at least I could be 110% confident in the products I was using.  The Tile Shop totally hooked me up for this project...and not just with my drool-worthy tile, but with the perfect products to complete the job.

So with my dry-fit complete, it was time to move to the next step.  Before I went any further, I took the time to remove the dry-fit from the hearth, and re-assembled it, in order, right next to the hearth for easy access once I started tiling.

Then we broke out the thinset...the Pro-Flex Platinum, Latex Fortified Thinset Mortar to be exact. 

Hubs and I headed to the garage to mix things up.  We knew this could be messy and wouldn't dare to attempt this inside on our hardwood floors.  We mixed the water and the powder with a mixer bar, per these instructions.  {**Make sure you pour the water in first, and then add in the powder...otherwise you will find it hard to mix things at the bottom of the bucket.  Just sayin'...**}

I wasn't sure how quickly I'd move along since this was totally my first "rodeo"...so we mixed a little bit at a time.  As I needed more, hubby headed to the garage and whipped up a new batch for me.  {**Let the thinset sit for about 5-10 minutes after mixing it, before you start using it.**}

I spread my thinset and laid my tiles using this technique.  Because my starting surface wasn't the smoothest, there were a couple random tiles that needed to be built up a little higher.  For those situations, I would either back butter specific tiles, or lift the sheet up and stick a little more thinset where need be.  My goal was to have each tile even with it's neighbor.

Before I knew it, I was D-O-N-E, and already counting down the hours {at least 24 to be exact} until I could start grouting.  Ugh...patience was never my strong suit. ;)

Operation Hearth Re-Tile - Making the Cut{s}...

Okay so after all the inspiration, perspiration and trepidation…it was time for the next step in my hearth re-tile project. 

After deciding on the 2" hex pattern and picking up that deliciousness and some supplies from The Tile Shop, it was time to use them!  More specifically, I needed to figure out the placement of the tile, make necessary cuts and dry fit things into place.

***Please excuse me while I panic about what the best way to to approach this is.***

Luckily, my helpful neighbor came to the rescue.  He tackled a tile project or two in the past, and was able to sit with me and map things out.  We had just enough tile for the hearth, with very little to spare…so we had to carefully utilize each and every sheet.  After laying all the tile we had out on the floor, we determined where to make cuts so I wasn’t filling in small gaps around everyyyyy edge of the hearth.  {Whose brilliant idea was it to use hex shaped tile for the first tile job they ever did??  Oh yea, that was me. :-/}

Using a straight edge {old piece of scrap wood}, measuring tape and pencil we marked our cuts on the tile.  And Perny supervised. ;)

We started with the first row of tile that would butt up against the straight edge closest to the fireplace.  We marked the tile so we'd be cutting the triangular tips of the hexagons off to create a flat edge on enough sheets to span the entire width of the hearth.  After that was done, we would then cut sheets to fill in the remaining gap between the sheets and the wood trim.  Once those cuts were done, we would peel individual tiles off of the sheets and make cuts to fill in the spaces along the two short sides of the hearth.

With our plan in place and our first set of marks done {we cut things one row at a time…after cuts were made, we’d bring things inside and do a dry fit to make sure we were on the right track} we headed out to the driveway for the fun/terrifying/panic-inducing task of using the wet saw.  Maybe you think I'm being a little dramatic about using the wet saw, but I'm pretty sure the last time I used a  power saw was in middle school shop class.

My awesome neighbor set the saw up, and then got me rolling.  I was TERRIFIED to make cuts.  Marble isn’t the easiest thing to cut…especially when it comes to taking off small corners of small tiles.  I was sweating.  I’m not sure if I was soaked more from the wet saw or my own nerves.  I. Didn't. Want. To. Chip. My. Fragile. Marble.

After I did the first few sheets, I calmed down a bit.  I was able to get through every single sheet and piece of tile without any chipping or errors.  Sorry for the out-right brag, but I was pretty proud of myself in that moment.  And then even a little more proud when I assured myself that all the pieces fit perfectly into place.

Dry fit complete!!!!

Anyone else give yourself a major pat on the back after completing a new-to-you task?!

***Although I was super, duper lucky to get some free tile and materials for this project from The Tile Shop, this is not a sponsored post.  I've always promised to keep it real with you guys, so I wanted to let you guys know how much they rock! :)***

Operation Hearth Re-Tile - Demo Time

After I received all the inspiration I needed from The Tile Shop, I was more than determined to demo the heck out of our old, outdated hearth.

To get things started, I used a hammer and flat head screw driver to pry up the front piece of wood trim that surrounded the hearth.  I slowly, and carefully, worked my way across the piece of wood...focusing my efforts where each nail was shot into the wood.  By prying things up in those areas, I had less of a risk of splitting or cracking the wood.

Once that piece was up, I put it to the side {keeping the nails in place so I could easily hammer the trim back down in the future}.  I could now see that the tiles used were super thin, and the concrete bed they were laid in was almost two inches thick, and the edges of it were crumbling.

To remove the super thick concrete bed, I busted out the crowbar.  I lined the edge the bar up with the bottom of the concrete.  After hammering a few times, I pulled back on the crowbar, and the concrete buckled.  Luckily, the majority of the hearth came out in a few huge chunks.

Once that layer was removed, I was left with a very jagged and uneven bed of concrete. 

It wasn’t exactly a flat or smooth sub-floor to build off of.  At this point, I started questioning things.  Why the heck did I think I could do this project?  How the heck would I smooth things out?  How am I going to build the surface up enough so it’ll be flush with the wood trim again?  I’m. In. Over. My. Head.  Soooo at that point, I went to bed. ;)

After I slept on things, I woke up with renewed confidence I could get it done.  To solve my issue, some people recommended using a self-leveling compound, but it just didn’t seem right to me.  The gap to fill was too big, and we were on the second floor.  If the compound seeped through any cracks {and believe me, there were a ton}, it’d go right through the floor and onto our furnace and hot water heater.  No bueno.  Instead, I turned to Henry’s Floor Patch and Leveler.  This stuff had the right consistency for my needs and was made to bond to concrete.

Following the instructions, I cleaned the concrete so it was free of any dust or debris.  {I also put the front piece of wood trim back on so all sides were the same height.}

 

Then I worked in sections...dampening the concrete with a sponge and then applying the floor leveler with a trowel.  I went through a few buckets of this stuff, and applied it in several thin layers {over several days}...gradually building up certain areas without piling the product on too thick.  After each application, I left things to dry overnight, and by morning it was always rock solid.

To figure out how high I needed to build up the base of my hearth, I took into account the thickness of my marble tile, plus the thickness of thinset to be used when installing marble mosaic tile.  Of course, I knew I wouldn’t be able to get the hearth perfectly level, but I could account for any inconsistencies by using more or less thinset to keep the tiles flush with each other during installation.

Thankfully, after a couple applications of Henry’s and a ton of patience, the hearth was finally ready for some new tile!

I couldn't believe how long it took me to get to the tiling point of this project, but I was so happy to be there!  I just wanted to get on to the pretty stuff. ;)

Anyone else question their ability halfway through a project?!?!  Did you keep going, or hire a professional?

Operation Hearth Re-Tile - The Tile Shop Inspiration

For those of you who follow me on Instagram, you may remember that over the winter I developed a major itch to demo our old fireplace hearth and replace it with something dreamy {and more our taste} from The Tile Shop.

When we purchased our home, we were sooo excited to have a fireplace, but the finishes of it definitely weren’t our style.

We knew the quickest, easiest and most inexpensive way to fix that was to paint what didn’t work.

The wood trim got a fresh coat of white, and so did the dingy, dirty red brick.

The brass screen was sprayed painted a brushed silver, and the worn, unattractive red tile was primed and painted a charcoal gray.  {Don't mind the old Christmas decorations...we moved in on Christmas Eve.}

That solution worked for the short-term.  It helped to bring our fireplace into this decade, but then, you know me...I grew tired of the paint chipping up, and I started dreaming of how much better the fireplace could be.  In other words, I got antsy to cross another project off the list.  I decided it was time to try my hand at tiling.  Ahhhh!!

To get some inspiration for the project, I headed to The Tile Shop showroom, which luckily, just opened a few months ago near our house.  I thought I would make a bee-line for the marble tile choices, but I was mistaken.  The minute I stepped in their doors, I was drawn to all the beautiful displays they had set up.  My absolute favoriteeeee was this bathroom.  I loved every. single. thing. about. it.

After lots of unintentional browsing, I was able to remind myself that I was there for our hearth project, not for a bathroom re-do…so I made my way to the marble mosaic tiles.  I think it's safe to say that I am obsessed with marble tile.  The white and grey veining is perfect for our home, and I love that it’s a classic material.  If it's cut into square tiles, it can be traditional....subway tiles, it can be classic...and then there is the hex tile.  Ahhhhh, the hex tile.  Pardon me while I swoon. ;)

I love that in marble, the hex tile is a classic choice, with a modern twist...perfect for the look we wanted to achieve on our hearth!  {And I'm not gonna lie...some subway tile in a herringbone pattern would also be UH-mazing, but the thought of that was a little nerve-wracking for me to take on for my first tile job.  Eeeeek!!  Maybe that'll be the right choice for a backsplash when the time comes. ;)}

Thank you, Tile Shop for totally indulging my love of hex tiles.  I was able to drool all over them and narrow down my choice to the 1" and 2" mosaics, seen above. 

So with all of that inspiration in mind, it was time to get to business.  I was ready to show that old hearth who is boss!!

***Although I was super, duper lucky to get some free tile and materials for this project from The Tile Shop, this is not a sponsored post.  I've always promised to keep it real with you guys, so I wanted to let you guys know how much they rock! :)***